Skip to main content

SOLVED: The Operating System Version Is Incompatible with Startup Repair

Although Windows 10 is the most recent iteration of the Windows Operating System, it is far from the most perfect one. Windows 10 users all across the globe have been plagued by tons of different problems, one of them being the dreadful “This Operating System version is incompatible with Startup Repair” loop. This is a problem where an affected user’s Windows 10 computer tries to boot up, detects one or more issues, tries to fix the issue(s) using Startup Repair, is unable to fix the issue(s) because that copy of Windows 10 – for a reason that still hasn’t been uncovered – is incompatible with Startup Repair, reboots and the same cycle repeats itself all over again.
Users affected by this issue find that their computer is completely unable to boot and does not even go through to the Welcome screen. Affected users’ SrtTrail.txt log files state that “This Operating System is incompatible with Startup Repair” – hence the name of this issue. In most all cases, this problem only affects Windows 10 users who have recently upgraded to the latest version of Windows from Windows 7, 8 or 8.1.

Since their computer simply refuses to boot up entirely and gets stuck in a “This Operating System version is incompatible with Startup Repair” loop every single time, most of the people affected by this issue believe that the only way to fix it is to reinstall Windows 10 from scratch. While reinstalling Windows 10 certainly resolves the problem, it means that you are going to have to start all over again and is an unnecessarily harsh resolution for a problem that can be fixed by simply disabling driver signature enforcement and then rebooting your computer. Yes, that’s right! The actual solution to this problem is pretty simple, especially compared to the Windows 10 reinstallation alternative.
To disable driver signature enforcement, you are going to have to access Windows 10’s Advanced Repair Options. You have a couple of different options when it comes to how you can get to Windows 10’s Advanced Repair Options screen, and here are the simplest and most effective ones:

Option 1: Mash Shift + F8 while your computer boots up

There is a chance that you might be able to access Windows 10’s Advanced Repair Options without any outside help by simply pressing and holding Shift and then mashing the F8 key repeatedly while your computer boots up. You might have to restart your computer and repeat this process 4-5 times in order for it to work. If this method works, you will be taken to a Recovery screen where you can click on See advanced repair options to access Windows 10’s Advanced Repair Options. However, be warned – this little trick only works on a small portion of all Windows 10 computers as most of them (especially newer ones) do not support it.

Option 2: Use a Windows 10 installation media

If Option 1 didn’t work for you or if you simply prefer an option that is guaranteed to work, you can also get to the Advanced Repair Options screen using a Windows 10 installation CD, DVD or USB. If you don’t have a Windows 10 installation media handy, use this article to create a bootable Windows 10 installation USB. Here’s how you can use a Windows 10 installation media to access Windows 10’s Advanced Repair Options:
Insert your Windows 10 installation media into the computer.
Restart the computer. While the computer is booting up, access its BIOS settings (the instructions for which vary depending on the manufacturer of the computer’s motherboard but are almost always displayed on the first screen you see when your computer boots up) and change its boot order in the Boot tab to boot from your installation media instead of the hard drive.
Save the changes and exit the BIOS.
If prompted to do so, press any key to boot from your installation media.
Select your preferred time zone, language and keyboard layout and then click on Next.
When you reach a screen with an Install now button at its center, locate and click on Repair your computer in the bottom left corner of the window. Once you do so, you will be taken to Windows 10’s Advanced Repair Options
Once you reach the Advanced Repair Options screen, you are more than halfway there! To actually disable driver signature enforcement using the Advanced Repair Options, you need to:
On the Choose an option screen, click on Troubleshoot.
Click on Advanced options.
Click on Windows Startup Settings.
Click on Restart. Your computer will now restart – allow it to do so.
When your computer boots up, you will see an Advanced Boot Options On this screen, use the arrow keys to highlight the Disable Driver Signature Enforcement option and press Enter to select it. Your computer should now boot up as it is supposed to and not get stuck in a “This Operating System version is incompatible with Startup Repair” loop.
disable driver signature

Comments

Post a Comment

Popular posts from this blog

Fix: System Found Unauthorized Changes on the Firmware, Operating System or UEFI Drivers

Several users are struggling with the  System found unauthorized changes on the firmware error  at every startup or when trying to take their computer out of hibernation mode. Most affected users report that the issue started occurring after they installed some pending Windows updates. The issue is mostly encountered on Windows 7. The system found unauthorized changes on the firmware, operating system or UEFI drivers. Press [OK] to run the next boot device, or enter directly to BIOS Setup if there are no other boot devices installed. What is causing the System found unauthorized changes on the firmware error We investigated this particular issue by looking at various user reports. This error will occur whenever your system is checking the firmware one some computer hardware parts as part of a new security feature. To be precise, the error is occurring because not all Windows versions will support this new security feature. As it turns out, there are sev...
Post a Comment
Read more

Fix: The Following Error Occurred Attempting to Join the Domain

Several users are getting the ‘ following error occurred attempting to join the domain ‘ error when trying to connect a computer to a home or work domain. Most of the time, the error is accompanied by an explanation message telling the user that it has exceeded the maximum number of computer accounts. The issue is not restricted to computers that connect to a domain for the first time, as it’s often reported to occur with PCs and laptops previously connected to the same domain. The following error occurred attempting to join the domain. Your computer could not be joined to the domain. What is causing the ‘following error occurred attempting to join the domain’ error? We investigated this particular error by looking at various user reports and the troubleshooting guides that they themselves followed to get the issue resolved. Based on what we were able to gather, there are several different scenarios that might trigger this particular error message: SMB1 support is di...
Post a Comment
Read more

How to Fix Startup Repair Loop on Windows 7

Getting a  boot loop  which doesn’t let you go past the  Startup Repair  in Windows 7 is something that a lot of users have experienced, and it is most likely due to corrupt registry entries. It might be your mistake if you have messed around in the registry and changed a key you shouldn’t have, but it can also happen by itself, as Windows isn’t really immune to that kind of problems. No matter whether it is your fault or not, you will not be able to boot up Windows, as it will be stuck rebooting itself and won’t make it past the  Startup Repair  screen no matter what. However, there is a solution that begins at the Startup Repair screen, and uses the command prompt to fix the problem by backing up your files, and refreshing Windows, so follow the steps below to see how you can get out of the boot loop. Backup your old files and refresh your Windows In order to start the system in start-up repair, you will need either the windows installation ...
Post a Comment
Read more